MS-22 DIY info

This page bundles all DIY info for my Steve’s MS-22 Dual VCF module.

The PCB+panel set

The PCB+panel set is for people who already have some experience with SMD soldering. The project contains +300 components, most of which are SMD components (0603 passive, SOIC, TSSOP). The total build takes about 8 hours.

If you order a PCB+panel set, here’s what you’ll get :

  • A Steve’s MS-22 front panel
  • A Steve’s MS-22 panel containing all four boards needed to build the module. As opposed to the assembled version, these PCB’s have an exclusive yellow silk screen.
  • (If in stock) A super cool Steve’s MS-22 promotional blind plate.

The Bill of Materials (BOM) can be found here.

Full DIY kit

Want to build an MS-22, but don’t feel like dealing with SMD soldering and sourcing components? The full DIY kit allows you to take the comfy route towards building your very own MS-22. The full DIY kit will offer a pleasant experience for all but the most innocent beginner. The build takes about 2-3 hours.

If you order a Full DIY kit here’s what you’ll get :

  • A Steve’s MS-22 front panel
  • A Steve’s MS-22 panel containing all four boards needed to build the module with all SMD components pre-assembled (green soldermask).
  • All required through-hole and mechanical components to finish the module.
  • (If in stock) A super cool Steve’s MS-22 promotional blind plate.

Assembly guide

The hand illustrated assembly guide (±47 Mb) walks you through the project without a hitch.

Who ever said that assembly guides have to be boring?

Limited support

Please note that strictly speaking I don’t provide support for DIY builds outside of the repair service. Still, if you’re having questions throughout the build, I encourage you to send me an e-mail.